2026-10-11 22:02:13
225
3
仿竹编收纳盒
@QIQIQI_3992394
Donate
Message
Follow
Recommended printing method
Add
防竹编收纳盒
Kobra X
Kobra 3
、
Kobra S1
、
Kobra 4
、
Kobra 3 V2
、
Kobra 3 Max
/ Plates:7
/ 12h15m
1
Share
Description
底波浪纹有悬垂部分，本方案调整参数，无支撑打印，需要更好的效果可以增加支撑，时间增加约一倍
参照颜色如下
盒体尺寸如下，根据壁厚可以适当缩小，
说明' 本方案因此纹样的设计而有感延展，想通过3D打印模仿竹编的编织体验
盒盖参照纹样分层设计打印，再一体安装，可增加错层立体效果，可按自己要求安装时调整前后顺序
底盒打印一体成型竹编横向状态，实际打印可自行更改每一编条的实际颜色，还可以使用半透明效果，得益于换色的简便，只需要在交接部分换色，实际速度很快，可自由发货创作
纵向编条也可以自定义颜色或者图案，因厚度较薄，复杂颜色和画面均可快速完成
在实际完成中还需要类似编织的技巧安装，
纵向编条是为了更好的打印盒取件，安装好后可自行剪断修饰，盒口编条可用胶水加固
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
