2026-10-21 23:57:58
69
3
咖啡萃取杯按压解压玩具
@YIWANTIAN_1802230
Donate
Message
Follow
Recommended printing method
Add
多色打印或手动单次换料
Kobra X
Kobra 3
、
Kobra S1
、
Kobra 4
、
Kobra 3 V2
、
Kobra 3 Max
/ Plates:4
/ 1h44m
1
Share
Description
咖啡萃取杯按压解压玩具
✨ 模型特点
外观还原意式咖啡萃取杯造型，内部咖啡液，利用打印本身自带的层感和设置的绒毛的颗粒感，模拟意式浓缩咖啡（Espresso）表面形成的一层层CREMA金棕色泡沫，按压操作时伴随反馈感，手柄末端带有挂孔设计，可搭配挂环挂在背包、钥匙扣、咖啡机上。
⚠️ 打印建议
可进行多色打印，或使用手动单次换料：如果没有多色打印条件，请在切片软件预览的59层、11.8mm处添加打印暂停，然后进行手动换料。
🔗 关联模型
📌 说明事项
模型所需“物料清单”以及相关的“组装说明”见附件。
物料清单中轴体二选其一即可，大多机械键盘轴体基本通用。
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Documentation
PDF
物料清单-中英双语长图.pdf
665.50KB
PDF
组装说明-中英双语长图.pdf
2.56MB
