车载伸缩玻璃擦Car-mounted telescopic glass wiper

下雨天气或者露水天气，对于没有后视镜加热功能的车主来说，为了安全驾驶要分别到右侧和左侧用布或者纸巾把后视镜上的水擦掉。作为一个设计师，想着要方便车主们的生活，于是设计了这款车载伸缩玻璃擦。模型分为三部分，玻璃擦主体、擦板以及尾塞。主体和擦板用petg打印，尾塞用tpu打印。打印完成后，将主体最上方部分直接插入擦板底部，留了0.5mm，正好可以紧紧固定。尾塞周围粘一圈双面胶插入主体的底部也可紧紧固定。擦板可用毛巾包裹再用皮筋固定，方便拆洗。玻璃擦收回后长度30cm左右，可放在副驾驶后面的袋子中。伸长预计80cm左右，坐在主驾驶完全可以擦到右边的玻璃。

In rainy or dew weather, for car owners without heated rearview mirrors, in order to drive safely, they should go to the right and left sides respectively and wipe off the water on the rearview mirrors with a cloth or tissue. As a designer, I wanted to facilitate the lives of car owners, so I designed this car retractable glass eraser. The model is divided into three parts: glass wiping body, wiping plate, and tail plug. The main body and wiping board are printed using PETG, and the tail plug is printed using TPU. After printing, insert the top part of the main body directly into the bottom of the eraser board, leaving 0.5mm, which can be tightly fixed. Stick a circle of double-sided tape around the tail plug and insert it into the bottom of the main body to firmly fix it. The wiping board can be wrapped in a towel and fixed with rubber bands for easy disassembly and cleaning. After the glass eraser is retracted, its length is about 30cm and it can be placed in the bag behind the passenger seat. The expected elongation is around 80cm, and sitting in the driver's seat can completely wipe the glass on the right side.