A pen holder for Kobra 2 Pro

an easy-to-print pen holder with no support materials for Kobra 2 pro/series, that would give you the ability to attach a pen to the print head so you can make your 3d printer write text or draw 2d designs.

the pen holder is attached to the print head via a simple mechanism, that clips to the fan slots on the sides of the print head, and you can remove it easily.

Please, consider having a look at the Demo file So you can figure out how to assemble it.

just a small note about the Demo file as its name said, it is just a demo that could help you understand how it should be assembled, don't print it!

it's easy to use and assemble you will need a little bit of glue to attach the Separator to the back of The Main Platform, and 2 nails of 3mmx70mmm plus a small rubber band, as for the screw that is located in the Pen Holder or the Pen clip as you can name it. I did use a screw that a have 3.85mm as a diameter and a proper thread with the same inner diameter and 7.75mm as an outer diameter from corner to corner, and you can use 3 screws, to attach the main platform to the Print Head Clip if you don't want to glue it

I may make a full tutorial in the future but for now, you have to figure it out, Sorry.

Have a nice day, with fantastic prints.