Big Boy Magnet Dispenser, holder IKEA Skadis & HSW
Hey guys,
as requested from one of our communitymembers here is the “BIG BOY” Version of my Magnet Dispenser which now holds 14 to 20mm Magnets.
As well as its little brother It is also compatible with HSW as well as IKEA skadis, it is modular you can use one as a single unit or stack them up up to 6 units in total.
the trigger is suspended by a rubber band and will return to its resting position after pulling.
one pull produces one magnet at a time.
Magnet compatibility as follows:
- 14x3mm up to 14x5mm
- 15x3mm up to 15x5mm
- 16x3mm up to 16x5mm
- 17x3mm up to 17x5mm
- 18x3mm up to 18x5mm
- 19x3mm up to 19x5mm
- 20x3mm up to 20x5mm
It will hold between 30 and 53 Magnets depending on their thickness.
have fun with this and if you like it feel free to like comment, rate or even hit that boost:
Installation:
you will require one regular rubber band per unit, preferably around 30mm in diameter, others will work to, as you can tie a knot to shorten them.
Print all parts.
- you will need Dispenser(s), Slider(s), Connector(s), and a Frame according to the quanities of the amount you would like to stack.
- slide the first dispensers onto the frame, and up so you have access to the slider section between.
- Insert the rubber band through the back of the frame
- Insert the slider into the dovetail from the front
- place the rubber band over the trigger of the slider.
- slide the dispenser into its final position while making sure not to pich the rubber band.
- loop the rubber band around one of the tree tensioning points. again checking the band to prevent exessive drillup
- repeat steps 2-7 untill all dispensers are on the frame
- install your prefered connecter to the dovetail of the frame
- slide the outer frame over the back of the unit to prefent the dispensers to come loose.
Load the Magnets and off you go.
(make sure to keep the polarity the same way around for every dispenser else the magnets might influence each other, especially on the 8-12mm sizes.)
If you experiance any issues please let me know, and i will look into it.
so if you have any recommendations do not hesitate to let me know i will look into it.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
