2026-07-04 09:25:40
347
8
Garden Shade Butterfly Supports
@D_3D_2808384
Donate
Message
Follow
Recommended printing method
Add
0.20mm Layers
Kobra X
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:2
/ 2h2m
3
Share
Description
I made some supports for those garden butterfly plant shades. Specifically, these found on amazon.
With no support they start to sag, and eventually fold down on themselves. Even quicker if there is wind and rain. These are a simple support brace to add in between the provided mounting hardware. Even if they are already a little damaged these can bring them back into shape. Small and large version available, both fit onto the butterfly, one just supports all the way to the edge, one is just the center area where the usual failure occurs.
I recommend gluing them in place and letting them cure before installing them to your garden. I used High Temp PLA but PETG should work just fine. Enjoy!
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
