2026-01-11 21:01:59
2.3k
46
KOBRA 3 - ACE PRO 8 PORT BOWDEN TUBE GUIDE
@AndreGuerrieri_326149
Donate
Message
Follow
Recommended printing method
Add
8port_Bowden_Oppo
Kobra 3 V2
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 2h11m
23
Share
Description
The Bowden tubes coming from the ACE can sometimes bend, twist, or sit at a sharper angle than ideal. When that happens, it can cause printing problems like filament clogs, jams or breaks. This 8 port Bowden guide helps keep the tubes routed cleanly and in a more natural position, allowing filament to feed smoothly.
INSTALLATION
Disconnect the Bowden tubes from both of your 4 port hubs, run them through the guide, and slide the guide onto the 8 port Kobra 3 filament guide. Removal is just as easy if you need access to the tubes later.
3D PRINTING
The model is printed upright. Print profile with recommended settings is included. Painted manual tree support is needed only on the bottom.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
