Magic Wand Display

Hi, I am Lisa from Myrko's Werkstatt,

this is a display stand for my Harry Potter wand collection. These are the print profiles for Anycubic Kobra X.

Some of the wands are slightly warped because I printed them in regular PLA and left the display stand in direct blazing sunlight.

Therefore, for greater stability, I recommend printing the wands using at least PLA+ or, better yet, PETG.

You can find the right wands with kobra X profile here: https://makeronline.com/en/model/16%20x%20Harry%20Potter%20magic%20wands%20collection/309154.html

Youtube:

https://youtu.be/EiwDBFvMECE

Special Credits for the Model Designs:

@DonaldWallace_699674 for the Display Stand and the Sorting hat:

https://makeronline.com/en/model/Wand%20Display%20Stand/140949.html

https://www.makeronline.com/en/model/Sorting%20hat%20and%20mount%20accessory%20for%20HP%20wand%20display%20stand/140918.html

https://creativecommons.org/licenses/by-sa/4.0/

@AbrisLaba_4285385 for the wands:

https://www.makeronline.com/en/model/Harry%20Potter%20wands/28241.html

@printer42 for the Wands, found on printables

Wands: https://creativecommons.org/public-domain/cc0/

Material:

https://store.anycubic.com/products/pla-plus-filament?ref=kgbunasy&variant=45796565680290

https://store.anycubic.com/products/pla-plus-filament?ref=kgbunasy&variant=43690025058466

https://store.anycubic.com/products/pla-plus-filament?ref=kgbunasy&variant=43690025681058

https://store.anycubic.com/products/pla-plus-filament?ref=kgbunasy&variant=45796587077794