Naboo N-1 Starfighter - Star Wars Replica

"Now this is podracing!" — Bring the most elegant starfighter in the galaxy straight to your desk!

This is a highly detailed, 3D-printable scale model of the iconic Naboo N-1 Starfighter from the Star Wars prequel trilogy and The Mandalorian. Featuring its famously sleek, aerodynamic fuselage, twin outrigger engines with large front intakes, and the long, pointed finishing tails, this model perfectly captures the royal elegance of Naboo's aerospace design.

This version has been meticulously engineered for single-color printing. You don't need a multi-material system, AMS, or automated filament changers to achieve an eye-catching result. The model utilizes deep, pronounced panel lines, distinct cockpit canopy trim, and sharp engine transitions that rely on natural shadows and highlights to make the details pop naturally. It has been tolerance-tested to print seamlessly on Anycubic FDM printers (such as the Kobra, Vyper, or Mega series), ensuring clean execution of its long, slender structural points.

Model Features

• Anycubic Slicer Calibrated: Geometrically optimized to handle the retraction transitions between the main hull and the outrigger engines without causing excessive stringing on standard Anycubic extruder setups.
• Sleek & Accurate Proportions: Captures the classic sci-fi aesthetic, making it a perfect display piece for your gaming setup, office desk, or Star Wars collection.

Recommended Print Settings

• Layer Height: 0.12mm to 0.16mm is highly recommended to cleanly resolve the smooth, sweeping curves of the hull and the incredibly fine pointed tails.
• Infill: 10% - 15% (Gyroid or Grid provides excellent internal stability without making the overhanging engines too heavy).
• Supports: Yes, supports are required under the main fuselage, the wing joints, and the overhanging engine pods. Tree/Organic supports configured in your preferred slicer (Anycubic Next, Cura, or PrusaSlicer) are highly recommended for effortless, clean removal.
• Brim: A 5mm outer brim is recommended to ensure the narrow, pointed tail stabilizers stay firmly anchored to your Anycubic print bed.