Rainbow Dice Tower (no AMS/MMU needed)
Need a boring singlecolor dicetower - then keep searching… But want something fun and colorful - then this is it! The Rainbow Dice Tower is full of color - and it can be printed without any multi-material systems. It's all 3D-printed. Let the game begin!
Overview
The dice tower is made in parts, for you to assemble and enjoy in the color combo you like! It’s makde in a size so that it can be printed on compact-sized printers with a max print height of 180 mm. It consists of the following parts:
- Base (and dice tray)
- Center (the column that keeps it all together)
- Stair (uses 21 Stair-parts - and every Stair-part actually consists of 2 steps printed at once)
- Stair Top (almost identical - can use ordinary stair part too)
Assembly
This is pretty straight forward - and requires no glue and no screws!
- Snap of printed supports of the Stair-parts
- Press every Stair-part into the Center-part (Start from the bottom. It's a snap-fit - not easy to pull out afterwards, and requires a little force to press in)
- Screw the Center onto the Base
Have fun!
Print instructions
Should be somewhat easy to print - but here is a few tips:
- Supports: Yes on the Stair-parts supports - NO supports on Center and Base
- Brim: Maybe. It can help with bed adhession on the Center - but not needed on Base and Stairs
- Orientation: The parts should be oriented correctly
Happy printing!
Want to show your support?
You can see ALL my designs on Printables- and you can become an active supporter. I would really appreciate it!
