Ribbed Wave Headphone Stand | Flat-Print Studio Desk Rest

💎 To get the full library of 3D models with commercial use and Custom Orders, join our Patreon here: https://www.patreon.com/thegulzar3d

🎧 Ribbed Wave Headphone Stand | Sculptural Audio Display

Organic flowing contours. Fluted acoustic texture. Print Flat with 100% Zero Supports.

Elevate your desktop setup and audio workstation with the Ribbed Wave Headphone Stand. Drawing inspiration from contemporary architectural curves and ergonomic omega-style silhouettes, this stand is engineered to provide an elegant, secure resting place for your premium over-ear and on-ear headphones.

The signature vertical fluting wraps continuously around the contoured body, creating a striking interplay of light and shadow that naturally conceals layer lines. Designed specifically to be printed flat on its side, this geometry completely eliminates tall-print wobble, guarantees 100% support-free printing, and aligns the filament grain along the curve of the arch for unbreakable structural strength.

🖨️ Bed Fit & Scaling Guide (Laying Flat on Side)

When laid flat on its side for printing, the bounding footprint on your build plate is:

• Length on Bed (X/Y): 230 mm
• Width on Bed (X/Y): 155 mm
• Height on Bed (Z): 90 mm

How to Fit Your Build Plate:

• 250 × 250 mm or larger beds (e.g., SPARKX i7 @ 260×260 mm, Bambu 256×256 mm): Drops directly onto the build plate flat with plenty of room to spare.
• Standard 220 × 220 mm beds (e.g., Ender-3, Kobra 2/3): Scale uniformly to 94%–95% to fit straight.
• Compact 180 × 180 mm beds: Scale uniformly down to 75%–78% (ideal for compact on-ear headsets or youth headphones).

📦 Headphone Compatibility (230 mm Full Scale)

At 100% scale, the stand accommodates all standard, studio, and audiophile headsets:

• 🎧 Audiophile & Studio Monitors: Sennheiser HD series, Audio-Technica ATH-M50x, Beyerdynamic DT series, AKG.
• ✈️ Active Noise-Cancelling (ANC): Apple AirPods Max, Sony WH-1000XM series, Bose QuietComfort, Shure AONIC.
• 🎙️ Office & Workstation Headsets: Jabra Evolve, Poly, Logitech Zone, and creative headsets.

✨ Key Design Features

• 🚫 100% Support-Free (Print Flat Only): Laying the model flat on its side eliminates all overhangs and ensures a factory-smooth finish with zero wasted support filament.
• 💪 Unbreakable Layer Orientation: Printing on its side aligns the extrusion lines continuously along the entire arch, ensuring maximum tensile strength against headband clamping pressure.
• 🏛️ Architectural Ribbed Profile: Continuous fluted ridges mask layer seams while giving the stand a refined, high-end designer finish.
• 📐 Broad Headband Cradle: 90 mm wide curved top gently contours to headbands without causing leather creasing or foam compression.

⚙️ Printing Settings

• Support: None Required.
• Orientation: Print flat on its side face ONLY. (Do NOT print standing upright. Printing flat guarantees zero supports, eliminates tall-print wobble, and maximizes mechanical strength).
• Layer Height: 0.20 mm or 0.28 mm (The ribbed texture hides layer lines so well that 0.28 mm prints fast with an outstanding finish).
• Wall Loops: 3 to 4 loops (Essential for rigidity under heavier studio headsets).
• Infill: 15% (Gyroid).
• Material: Matte PLA, PETG, or PLA+ (Matte Navy Blue, Forest Green, or Dark Slate Gray complement modern studio desks best).