2026-05-26 17:12:11
2.5k
121
Simple PTFE Guide mount for Kobra X
@PlaDreams_4057917
Donate
Message
Follow
Recommended printing method
Add
0.2 no supports
Kobra X
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 41m
Tube Holder
Kobra X
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 58m
31
Share
Description
WARNING: Unclip the top if doing prints over 150mm high if using the guide.
EDIT: 28/06/26
Improved snap
PTFE holder also includes snap for the guide
Because im using ACE on the left side without the Clog Module, i didn't want the PTFE tubes to rub on the frame.
So this simple guide solves my problem, now the tubes run from the top. They swivel with the nozzle rotation and when Z moves up the tubes go into the back.
Simple clip into the frame.
I didn't use hinge so open as little as possible when inserting.
I suggest matte as its softer and more forgiven.
Also included a PTFE holder to prevent tubes going behind the plate.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
