2026-10-06 21:44:47
77
3
Snap together carboard fastener
@AllenBassham_3283160
Donate
Message
Follow
Recommended printing method
Add
PETG CF Push Pegs and Washers
Kobra X
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 17m
2
Share
Description
This is an easy to print fastener that pops together with a retaining washer. It can be used to hold pieces of cardboard, fiber board, just about anything, together. Just pop a 10.75mm hole and poke it through. The retaining washers will lock it in place. It also makes a good swivel snap. I suggest printing in PETG or PETG CF for strength. The retaining washers take about 2 minutes to print on the Kobra X. This set of 1 peg and 2 retaining washers to about 13 minutes. I will add a cardboard gouge to make the hole as some point and add to this file set.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
