Spiky Mushroom Cat Self Scratcher / Self Groomer

A self groomer with large-ish spikes on a leg that can be mounted either horizontally or vertically allowing for plenty of options for your cat to deal with any itch!

Usage

Preferred mounting method is with double-sided tape, but it has to be a strong tape, as the presence of the leg amplifies the force exerted by your cat. I've also added an option with mounting holes that you can use to screw the mushroom in.

Mount the mushroom on any flat horizontal or vertical surface your cat frequents, then sprinkle some catnip (or use catnip spray) and I'm sure your cat will love interacting with it.

Size

The mushroom is 8.5 cm long from the base to tip of the top spikes, the base is 7cm in diameter and the head is 8 cm in diameter between the tops of bottom row of the spikes.

The mounting holes option has 2 holes in the base with 5mm diameter, with their centers 20mm from center (40mm apart) allowing for plenty option for mounting screws.

The mushroom weighs around 55 grams in total.

Color options

There's single color and 2 color options. The 2-colour print uses plenty of material due to amount of color changes, so I'd recommend printing several mushrooms on single plate to spread out the waste, however despite longer print time and more material the 2-color option is way cuter :)

Print with supports

The mushroom does require supports, make sure that your settings are properly tuned!

I hope your cat will like playing with the mushroom groom :)

Cat Scratchers & Accessories

Check out my other cat scratchers!