The Glowing BOO! – Glowing Halloween Sign as Standee or Magnet
💡 Concept:
Complete your Halloween setup! This eerie glowing "BOO!" sign instantly creates a creepy atmosphere in your home. Combined with GLOW-PLA filament, the letters glow intensely in the dark — making it an eye-catching piece on any table, shelf, or fridge.
✨ Key Features:
- 2 Versatile Options: Available as a tabletop standee or as a fridge magnet.
- Embedded Magnets: The magnet version includes custom recesses designed for two 10×2 mm magnets.
- Intense Glow Effect: Optimized for GLOW-PLA filament to give you a long and vivid night-time glow.
- Super Filament Efficient: Consumes only about 21 g of filament!
🖨️ Available Print Profiles:
1️⃣ For Combo:
- 2 Variants Available:
- Tabletop version (With Stand)
- Magnet version (With Magnets for 2× 10×2 mm magnets).
Note: A pause command is pre-programmed into the print profile so you can easily insert the magnets during the print before it resumes over them.
2️⃣ No Combo Required:
- Printed as separate parts that are simple to assemble.
- 2 Variants Available:
- Tabletop version (With Stand)
- Magnet version (With Magnets for 2× 10×2 mm magnets)
Note: A pause command is pre-programmed into the print profile so you can easily insert the magnets during the print before it resumes over them.
The parts are all printed upside down; for a better print image, please turn them over and glue them together.
🎯 Recommended Use:
- Spooky Halloween decor for tables, shelves, desks, window sills, or fridges.
- Great for Halloween parties or as an entry decoration.
- Fantastic small gift or party favor for Halloween lovers.
☀️ Important UV & Material Information:
- UV Charging: I use a 50W UV floodlight with a wavelength of 395–400 nm, which is the optimal frequency band for GLOW-PLA to react. The phosphor pigments inside the PLA charge up to 100% within just 30 to 60 seconds.
- Real Photos: These photos are real, the glow effect of the GLOW filament works amazingly well with a proper UV light source.
- Infill Recommendation: All GLOW-PLA objects are printed at 100% Infill so the GLOW-PLA shines as brightly and as long as possible. If you don't want to use GLOW-PLA, you can simply lower the infill value to 15% Infill in your slicer's object settings.
🖨️✂️ Printing & Assembly Instructions:
- Thoroughly clean your print bed before starting (Isopropyl Alcohol / IPA works best).
- Choose your preferred print profile (Combo or No Combo) and variant (Stand or Magnets).
- For the magnet version with a pre-set pause in the Combo profile: insert the magnets (10×2 mm) into the slots during the pause and resume printing.
🔔 Caution: I printed and tested this model myself on my Kobra X printer without any issues. It prints reliably without hassle.
📊 Print Stats & Hardware Overview:
- Filament Consumption: approx. 21 g
- Filament in Example: Overture GLOW-PLA Green & Red, Overture PLA Matte Black & White
🎃 Check out my other Halloween models here:
👉 [LINK]
I will be releasing more spooky models, functional prints, and cool decor ideas in the future! If you don't want to miss anything, feel free to follow my profile.
I would love to see a photo of your print, a comment, or a thumbs up! 👍
I'd be very happy if you'd follow me.![]()
