躺平式干果机主动干燥箱/Lying-flat Type Dried Fruit Machine Active Drying Box

描述

功能：

一、干果机增高：无需采购零件，打印4片增高件即可。

二、干果机干燥箱：需采购零件3个，ZZ608轴承*1、嵌入式长方形温湿度计*1、PC4M5气动接头*1，打印所有打印件。

如需多层果盘叠加，多套打印即可。

注意：适配的直径28cm干果机，建议打印前热床PEI板洗净或涂胶水增加热床粘附力。

一、所有打印件建议用PETG或以上耐温材料打印，经持续测试一周PETG可正常使用。

二、设计零件均留有0.2mm公差，请根据自己打印机公差酌情调整切片。

Description

Functions:

1. Raising the height of the fruit dryer: No need to purchase parts. Just print 4 heightening parts.

2. Fruit dryer drying box: 3 parts need to be purchased, 1 ZZ608 bearing, 1 embedded rectangular thermometer and hygrometer, 1 PC4M5 pneumatic connector. Print all printable parts.

If you need to stack multiple - layer fruit trays, just print multiple sets.

Note: For the fruit dryer with a diameter of 28cm, it is recommended to wash the hot - bed PEI plate or apply glue before printing to increase the adhesion of the hot - bed.

1. It is recommended to print all printable parts with PETG or higher-temperature-resistant materials. After continuous testing for one week, PETG can be used normally.

2. All designed parts have a tolerance of 0.2mm. Please adjust the slicing according to the tolerance of your own printer as appropriate.