Anycubic Kobra 3 / Kobra 3 Max Cable & PTFE Tube Holder Anycubic Kobra 3 / Kobra 3 Max 线缆 & PTFE 管支架

Keep your cables and PTFE tubes elevated, organized, and out of the way.

This simple Cable & PTFE Tube Holder is designed for the Anycubic Kobra 3 and Kobra 3 Max. It helps support the bundle of PTFE tubes and cables above the print head, creating a cleaner and more controlled routing during movement.

Without additional support, the tube and cable bundle can hang down significantly as the print head moves across the X-axis. This holder provides an additional support point, helping the bundle maintain a smoother and more consistent curve.

Features

• Compatible with Anycubic Kobra 3
• Compatible with Anycubic Kobra 3 Max
• Supports the PTFE tube and cable bundle
• Helps keep the bundle elevated
• Cleaner and more organized cable routing
• Reduces excessive hanging of the tubes
• Simple clip-on design
• Easy to print and install
• No modification to the printer required
• Useful for setups using ACE / ACE Pro

The holder is designed to allow the tube bundle to move naturally with the print head while providing additional support.

A small and simple upgrade that makes the Kobra 3 / Kobra 3 Max setup look much cleaner and keeps the PTFE tubes better organized.

Installation: Simply clip the holder onto the upper frame and place the cable/PTFE bundle through the support.

模型描述

让线缆和 PTFE 管保持悬空、整齐，并减少下垂。

这款简单实用的 线缆 & PTFE 管支架 专为 Anycubic Kobra 3 和 Kobra 3 Max 设计。

它可以为打印头上方的 PTFE 管和线缆提供额外的支撑，使线束在打印头移动过程中保持更加整齐、稳定的走线。

如果没有额外支撑，当打印头沿 X 轴移动时，PTFE 管和线缆可能会明显下垂。这个支架增加了一个支撑点，让线束保持更加自然、平滑的弧度。

特点

• 兼容 Anycubic Kobra 3
• 兼容 Anycubic Kobra 3 Max
• 支撑 PTFE 管和线缆束
• 减少线束下垂
• 让 PTFE 管保持悬空
• 走线更加整齐美观
• 简单的卡扣式设计
• 打印和安装都非常简单
• 无需修改打印机
• 适用于 ACE / ACE Pro 多色系统

支架在提供额外支撑的同时，也能让 PTFE 管束随着打印头的移动自然活动。

这是一个简单但非常实用的 Kobra 3 / Kobra 3 Max 升级配件，可以让打印机看起来更加整洁，同时改善 PTFE 管和线缆的整理方式。

安装方法： 将支架卡在打印机顶部框架上，然后把 PTFE 管和线缆束放入支撑位置即可。