Cake Slicer – One-Piece Wedge Cutter

Cake Slicer – One-Piece Wedge Cutter

A practical one-piece cake slicer with a triangular cutting frame, serrated edges and an integrated handle. Press the wedge into a soft cake to form a triangular slice, then lift carefully. No assembly, metal blade or additional hardware is required.

Printing notes

• FDM printing; a single colour is sufficient.

• Place the model in its saved orientation and check the first layer in your slicer.

• Suggested starting settings: 0.20 mm layers, 3 walls and 15% infill.

• Supports are disabled in the supplied project. Check the preview for your printer before printing.

• The supplied 3MF was prepared in ELEGOO Slicer for an ELEGOO Neptune 4 Pro with a 0.4 mm nozzle. Change the machine and filament presets for your actual printer. It is not an Anycubic printer profile.

• PLA is used in the supplied project, with 220 °C nozzle and 60 °C bed settings. Adjust to suit your filament.

Allow the print to cool before removing it, and remove any brim or sharp burrs. The download does not certify food-contact suitability; use an appropriate food-safe barrier when needed.

The photos show the physical model. The cake and background props are not included. Designed by Trisztan.