Forgotten Hall Entrance – Fantasy Tabletop Ruins

Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Forgotten Hall Entrance – Fantasy Tabletop Ruins

Beyond the broken archway, the old hall waits in silence. Fallen stones cover its steps, but the passage is still open to anyone brave enough to enter.

This ruined stone entrance is a terrain piece for D&D and other tabletop RPG adventures. A carved doorway, damaged pillars, cracked masonry and scattered rubble give it the look of a long abandoned dungeon or temple. Place it at the start of an encounter, use it as an objective, or make it the entrance to the next part of your story.

Scale reference: The 28 mm miniatures in the photos show how the terrain looks beside tabletop characters. They are shown for comparison and are not part of the terrain model.

   Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT

2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.
•  
•  
• Recommendations:
• 
  
•  
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
•  
• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.
•  
• Clean the plate thoroughly before printing.
• Make sure the filament is dry and free from dirt. This can damage the print or weaken the support