Ghostface Middle Finger Figurine

Bring a bold Halloween vibe to your 3D-printing collection with this Ghostface-inspired streetwear figurine. The model features a masked character wearing a detailed oversized hoodie, relaxed baggy pants, gloves, and chunky white sneakers.

The dynamic standing pose, tilted head, raised hand gesture, flowing clothing folds, and contrasting black-and-white color scheme give the model a modern urban/Halloween collectible appearance. It works especially well as a desk decoration, gaming-room accessory, Halloween display piece, or collectible figurine.

The model is designed as a 3MF file for convenient slicing and multi-color 3D printing. The black clothing and white mask/shoes also make it suitable for either multi-color printing or separate filament/color assignments.

Recommended uses:

• 🎃 Halloween decoration
• 🖥️ Gaming/PC desk decoration
• 👻 Horror-themed display
• 🧸 Collectible figurine
• 🎁 Halloween gift
• 🖨️ Multi-color 3D printing

The 3MF package is optimized for easy preparation in modern slicers while maintaining the character's detailed clothing, mask, gloves, and sneaker geometry.

🖨️ Short Print Profile Description

Recommended profile: 0.16–0.20 mm layer height, 3 walls, 10–15% infill, PLA/PLA+ filament, moderate supports for the raised hand and overhanging areas. Use slower outer-wall speeds for cleaner clothing and mask details.

⚙️ Recommended Print Settings

• Layer Height: 0.16–0.20 mm
• First Layer: 0.20 mm
• Wall Line Count: 3
• Top/Bottom Layers: 4–5
• Infill: 10–15%
• Infill Pattern: Gyroid or Grid
• Print Speed: 50–70 mm/s
• Outer Wall Speed: 30–40 mm/s
• Supports: Recommended
• Support Overhang: 50–55°
• Support Density: 10–15%
• Support Interface: On
• Build Plate Adhesion: Skirt or Brim if needed
• Nozzle: 0.4 mm
• Nozzle Temperature: 200–215°C for PLA
• Bed Temperature: 55–60°C
• Cooling: 100% after the first few layers
• Filament: PLA / PLA+
• Seam: Place toward the back where possible
• Print Orientation: Upright, as provided
• Multi-Color: Recommended — black for clothing/body and white for mask/shoes

Tip: For the cleanest result, use a 0.16 mm layer height and enable a support interface around the more detailed overhangs. This will improve the mask, hood, raised hand, and clothing details.