Halloween Raven Pumpkin

The model features a detailed black raven perched on a wooden branch, surrounded by three unique jack-o’-lantern pumpkins and a decorative ring of miniature skulls. The combination of orange, black, brown, and bone-white elements makes it an eye-catching Halloween centerpiece, desk decoration, shelf ornament, or seasonal tabletop display.

Designed with detailed textures and layered features, the model looks especially impressive when printed with multiple filament colors.

🖨️ Short Print Profile Description

Quality-focused profile for a detailed multi-part Halloween display. Balanced layer height, moderate infill, and optimized walls provide a good combination of detail, strength, and reasonable print time.

⚙️ Recommended Print Settings

• Layer Height: 0.16–0.20 mm
• First Layer Height: 0.20 mm
• Wall/Perimeter: 3
• Top/Bottom Layers: 4–5
• Infill: 10–15%
• Infill Pattern: Gyroid or Grid
• Supports: Generally Not Required; use supports only where your slicer detects steep overhangs
• Print Speed: 50–70 mm/s
• Outer Wall Speed: 35–45 mm/s
• Nozzle: 0.4 mm
• Nozzle Temperature: 200–215°C for PLA
• Bed Temperature: 55–60°C
• Material: PLA / PLA+
• Cooling: 100% after the first few layers
• Brim: Optional, recommended if any small parts have poor bed adhesion

Tip: For the best appearance, use black filament for the raven, orange for pumpkins, brown for the branch, and ivory/cream for the skulls. 🎃🐦‍⬛💀