Jack O Cauldron

Jack O Cauldron a halloween decoration of an evil witch smoking potion brewing cauldron.

Parts list (not an affiliation links):

-Ultrasonic fog maker: 

https://a.co/d/0hpFocJg

-Waterproof Sealer Mod Podge: or you can use polyurethane or epoxy sealer. The sealer is important to prevent water leak.

https://a.co/d/0eG59G78

- (optional) Fog machine liquid: Mix a little portion with water or just use only water.

https://a.co/d/0fuHLqvq

Filament:

- PLA Black

- PLA Transparent

- PLA Green

- PLA Purple

- PLA yellow

- PLA Brown

- PLA Gray

Disclaimer: 

- The pumpkins and the ghost in the photage are only props for photography purposes…they are not included in print files, you can find them on the internet on the original creator's page.

- This is Not AI generated design.

Note: 

if you have any inquiry please do not hesitate to ask ^^ lets all enjoy 3D printing.

Before you print:

The print plate should be cleaned with soapy water or IPA.

The machine should be properly maintained and lubricated.

The machine should be pre-calibrated, with auto bed leveling and pressure advance.

The filament flow rate should be calibrated.

The filament temperature should be optimized.

Support filament material is recommended (as I do most of my prints using support material filament for clean layers and easier support removal).