Vince Carter #15 Raptors Jersey – Exposed Infill

Celebrate the iconic purple dinosaur era of Toronto basketball with this Vince Carter #15-inspired 3D printed jersey!

This dimensional sports art piece combines multicolor graphics with exposed infill to create a textured, mesh-like appearance inspired by traditional basketball jerseys.

Design Features

• Purple exposed-infill jersey body
• Detailed multicolor dinosaur artwork
• Raised lettering and jersey number
• Dimensional outlines and accents
• Great for basketball-themed displays and sports collections

Printing Recommendations

• Thoroughly clean your build plate before printing. Exposed infill requires excellent first-layer adhesion.
• Verify filament assignments and color changes.
• Print the jersey flat on the build plate.
• Preserve the exposed-infill areas when slicing.
• Inspect the sliced preview before starting your print.

Recommended Filament Swap at Pause

To reduce the number of filament slots needed for this multicolor print, I recommend swapping the purple filament for red at the programmed pause.

1. Start the print with purple filament loaded in its assigned slot.
2. When the printer reaches the programmed pause, remove the purple filament from that slot.
3. Replace it with red filament in the same slot previously occupied by purple.
4. Resume printing. The printer will now use red whenever the print profile calls for the original purple filament slot.

This allows the purple portions of the jersey to print first, followed by the red details, without requiring an additional filament slot.

Important: Complete the filament swap before resuming the print, and verify that the programmed pause is preserved in the sliced file.

Designed and printed by Three-D Craftsmen.

Fan-created artwork. Not affiliated with or endorsed by the Toronto Raptors, NBA, or Vince Carter.