wall / desk clock Santa Claus

You can sell this model

with a membership on Patreon.

 www.patreon.com/cP_3D

I have made another clock here. Maybe some of you also like this clock.

I could imagine that this watch would also be a very great gift for someone.

I created a version with 245 mm for wall and table

If you would like to get others excited about these wall clocks, please share the link on social media.

Here you will only find the dials!

You can find the necessary accessories under the following link:

https://www.makeronline.com/en/user/collectionDetail/c9781133-ef92-49c0-8139-655dec2130ba/53253.html

And here you will find more beautiful dials:

https://www.makeronline.com/en/user/collectionDetail/c9781133-ef92-49c0-8139-655dec2130ba/21370.html

To minimize print time without compromising quality, I configured height range modifiers in my print profiles. So don't be surprised if the swap instructions don't match the data in the print profile

Print at 100% infill with a layer height of 0.06mm with a base layer of 0.12mm

Filaments Used: (* = Owned)

#000000 * PLA BambuLab Basic Black Transmission Distance: 0.6

#c00d1e * PLA BambuLab Basic Red Transmission Distance: 4

#fce300 * PLA BambuLab Basic Yellow Transmission Distance: 6

#ffffff * PLA BambuLab Basic Jade White Transmission Distance: 7

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #18 (1.14mm) swap to Red

At layer #23 (1.44mm) swap to Yellow

At layer #24 (1.5mm) swap to Jade White

At layer #30 (1.86mm) swap to Black

At layer #31 (1.92mm) swap to Red

At layer #32 (1.98mm) swap to Yellow

At layer #33 (2.04mm) swap to Jade White for the rest.

If you get the message with the floating regions when slicing... you can ignore this