Anycubic Kobra X Cable Guide

ANYCUBIC KOBRA X - Cable Guide 

3D Printer Mod Series

Published by 3D Print Official

Inspired by:

Anycubic Kobra X Sagging Cable

—and the hot air from the build plate softening the cable

ANYCUBIC KOBRA X - Cable Management Mod

If your extruder cable is sagging onto the bed or catching on the gantry, you need this. I designed this mod to be a "print-and-forget" solution that gives your Kobra X a professional, managed look while extending the life of your wiring. By supporting the cable’s natural arc, The ANYCUBIC KOBRA X - Cable Guide prevents "cable fatigue" and ensures your wiring harness doesn't snag on prints or the gantry during high-speed moves.

Easy to print and even easier to instal.

Dual Cable Connectors: These anchor the system at both ends.

• Material Tip: TPU is highly recommended for the best grip and flexibility, but PLA works just fine. Print directly from the 3MF file to avoid problems with overhangs.

The Main Cable Guide: This provides the structure to keep everything upright and tidy.

• Printing: I’ve included a highly optimized 3MF file. Print the guide in PLA using this file to ensure you get the best structural profile without needing any messy supports.

Optimized Print Settings: I’ve tuned the 3MF file for maximum strength-to-weight ratio. I recommend:

• Walls: Only 2 walls.
• Wall Thickness: Set to 0.65 mm.
• Why? This creates a "tough-but-flexible" part. It’s thick enough to be indestructible but thin enough to have the "spring" needed to snap onto the cables without breaking.

Installation: It’s a 30-second job. Snap the connectors to the ends, slide the guide over your cable, and pop it into the inlets. No screws, no supports, no headache.

Share + Support

If you print this model, please:

• Like the model,
• Comment with photos of your print/finish (I’d love to see different color choices),
• Share or repost to help other makers discover it.