“Snow Peak” Snowboard Wall Mount

Decorative snowboard wall mount shaped like a snow-covered mountain, combining functionality with stylish interior decor. Equipped with a TPU cover that protects both the mount and the snowboard from impacts with the board's sharp edge. The integrated lower hook allows convenient hanging of a helmet, goggles, or gloves, saving space in a room, garage, or home ski room. I personally used PLA Glow filament for a cool glowing effect :D The mount fits most standard-thickness snowboards—check the spacing that works for your board before mounting. The model is optimized for 3D printing—no complex supports needed, with a reinforced wall base and rounded edges for added strength. The print profile includes a tool model that makes attaching the TPU cover to the hanger very easy.

Assembling instructions:

Step 1: Prepare TPU Cover

Place the TPU cover onto the provided assembly tool for easy handling.

Step 2: Apply Glue

Apply glue evenly to both cover sides.

Step 3: Attach Cover

Slide the cover into position on the hanger, ensuring proper alignment.

Step 4: Mount to Wall

Secure the hangers to the wall at the correct spacing for your snowboard.

Step 5: Mount Front Panel

Secure the front panel to the hanger using the provided pins.

Orient the flat pin sides toward the hanger's top surface for a perfect fit.