Pumpkin Mage Blocks Dragon Fire！丨Monitor Wars of Halloween 3/4

Just as the Pumpkin Castle is about to be wiped out by dragonfire, the mage apprentice stationed inside gathers every scrap of magic he has and opens a shield at the tip of his staff. Slowly, stubbornly, he pushes the flames back off the castle walls — buying the castle one short breath. But when his magic runs dry... that's the end?

This is Halloween Special #3 in Monitor Wars series. A complete little scene that comes with the Ember Dragon and its flame, and pumpkin mage and its castle built as a monitor ambient light that wakes with your PC. The second you boot up and the screen lights up, the dragon's breath erupts and the mage throws his shield up at the same instant. Every boot, the same fantastical assault.

Supports are already set up, so it prints as-is. I've optimised them as much as I can — almost all contact faces are sloped, and both PLA and PETG release cleanly in my testing.

By default the scene mounts on top of your monitor facing left. Want it facing right? Just mirror the whole model.

The lighting is simple. For the dragonfire, any generic 5V 1 .5 mm 360° COB USB LED strip works — in China search it on Pinduoduo for around ¥10; overseas, the same keywords on Etsy，Amazon, Seeed Studio or AliExpress. Feed it in (a dab of oil or WD-40 at the top helps it slide), fix it with a spot of glue, and plug it into the USB port on the back of your monitor or straight into your PC — it lights up with your machine, no switch to press. For the light in the castle and the mage's staff, use Petite size LED Mini light(Link below). No lights on hand? Print it anyway — it works as a scene with a story on its own, and you can always add the light later.

I've put a lot of work into this one — if you print it, I'd really love a rating and a make photo!

It's compatible with the other dragons and parts in my Monitor Wars series, sized to the 20 cm group by default. Try printing the Lone Shield Warrior or the Ice Blue Frost Skeleton Dragon too and build out a bigger battlefield on top of your screen.Note: Mirror the dragon in the linked file before using it with this Halloween series.

Follow me if you want to catch new kits as they drop.

Tap the title below to jump straight over.

Ice Blue Frost Skeleton Dragon Breath Lamp on Boot — Monitor Buddy

Lone Shield Warrior Clashes with Skeletal Dragon's Ghost Flame

——Material Purchase Notes——

5V 1 .5 mm 360° COB USB LED strip

Petite size LED Mini light

以下是中文简介

在南瓜城堡即将遭遇龙焰毁灭之际，驻守城堡的南瓜法师学徒凝聚起全身的魔力，在法杖顶端张开了护盾，顽强地将龙焰从南瓜城堡的城墙上逐渐推开，勉强为南瓜城堡争取了一个喘息的机会。然而，当他魔力枯竭，就是毁灭之时？

本作是《显示器上的战争》系列万圣节特别篇之三，一整套完整场景自带烬狱焚鳞魔龙与它的龙焰，也是同步电脑启动的屏幕联动氛围灯。在电脑开机、屏幕点亮的瞬间，烬狱焚鳞魔龙的龙息同步轰然迸发，南瓜法师同步撑开护盾！每一次开机，都能感受巨龙来袭的奇幻氛围感。

模型已经设置好支撑，可直接一键打印。支撑已经尽可能优化过，绝大部分都是斜面，实测 PLA 和 PETG 都能完整拆除。

默认安装在显示器顶端、朝左，需要朝右安装的话，把模型整体镜像一下即可。

灯的部分很简单：龙焰用一根 5V 1.5mm 360度 COB 灯带，国内拼多多搜一下 10 块左右，海外的朋友在 Amazon、Seeed Studio、AliExpress 或 Etsy 搜同样的关键词；穿灯之前可以在顶端加一点油或者 WD40，进去之后点上一点胶固定，USB 口插显示器背后、或者插主机上都行，开机就能感受龙焰燃起。南瓜法师法杖顶端的灯可以用磁感灯 AG1，国内拼多多搜索即可，海外的朋友可以在etsy等网站购买。即使手头暂时没有灯，也可以先把它当作一件有故事的场景模型，后面再加上灯就更棒了。

这是我非常用心做的模型，期待你的返图和评分！！！！

本模型兼容以往我的《显示器上的战争》系列模型中的其他巨龙和组件，默认对应 20cm 组别。有兴趣的朋友可以去尝试打印《孤盾战士硬撼骸龙幽焰》《冰蓝霜骸骨龙息灯》等组件，布置更有趣的显示器战场！

关注我，新作第一时间能看到。