2024-07-21 00:34:16
6.3k
876
Round Birdhouse
@designsbyMarcum_1370171
打赏
私信
关注
推荐打印方式
添加
PETG Profile
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
文件:2
/ 0m
PLA Profile
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
文件:2
/ 0m
253
分享
描述
No city is complete without wildlife, and that wildlife needs a safe place to call home. Therefore, I have created this simple, but elegant Round Birdhouse!
All parts of the Birdhouse are 3D printed and the only hardware needed is a #10 screw for mounting.
The Perch Rod and Nut are designed to be a tight fit, so if needed you can use a 13/16 socket to assist with tightening. Do not over tighten or you risk breaking the threads on the rod.
Due to this design being made for outdoor use, it is recommended to use at least PETG to help with any heat or weather encountered.
Assembly instructions:
- Place Perch Rod through hole on Front piece of birdhouse
- Tighten the Nut on the exposed threads of the Perch Rod
- Do not over tighten. The Nut will secure nicely against the back of the Front piece and once that is achieved you can stop tightening.
- Angle the Front piece and slide / rotate it into the Housing
- Snap the Front piece into the Housing using the locating dots
- There are 3 balls on the Front piece that line up with 3 indents on the Housing
- 1 is at the very bottom. It is easiest to keep the front Piece angled and guide that connection into place first, then pull up on the Front piece to click the others into place.
If you'd like access to a Commercial License and exclusive designs not available anywhere else:
标签
版权声明
Standard Digital File License
该作品受标Standard Digital File License保护。
您不得分享、转授权、出售、出租、托管、转让或分发该数字文件或该对象的3D打印版本，以及以数字或物理形式存在的任何其他衍生作品（包括混音）。未经许可，您不得以任何方式使用这些物品进行费用收取。
您不得分享、转授权、出售、出租、托管、转让或分发该数字文件或该对象的3D打印版本，以及以数字或物理形式存在的任何其他衍生作品（包括混音）。未经许可，您不得以任何方式使用这些物品进行费用收取。
